User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 35 of 51
Near Field Communication KIT (E001004)
You can optionally add a NFC KIT to the X-Series touchcomputer to any of the three mounting
locations located on the display head top, left, and right of the touchcomputer
The NFC KIT is a USB 2.0 device and compatible design for X-Series all configurations. The
NFC KIT is powered by the USB port; no external power is needed.
The NFC KIT specifications are shown in below table.
ISO 14443 TYPE A and B compliant
ISO 18092 compliant
Encrypted card data (AES or Triple DES)
DUKPT key management with more than 2M keys
(model selectable)
Authentication with RSA 2048 bit key
American Express ExpressPay
Discover ZIP
MasterCard PayPass/MCHIP
Visa MSD/qVSDC
Google wallet (optional)
Apple Pay
Contactless communication at 13.56MHz
Supports 2-SAM or 4-SAM board (optional)
Build-in direct matching antenna
Remote 50 ohm matching antenna (optional)
USB2.0 compliant / HID support
Standard RS-232 signal level
< 330mA (idle mode)
< 430mA (operation mode)
-20°C to 70°C (Operating)
-30°C to 70°C (Storage)
10 to 85% (Operating)
10 to 90% (Storage)
Comments to this Manuals