Elo Touch Solution X7-17 User Manual download pdf (Page 29)

User Manual: X-Series Rev A AiO Touchcomputer

SW602213 Rev A, Page 29 of 51

 POLE MOUNT STAND KIT (E038989)

- The Pole Mount Stand support 7”~15” customer display and different portable

devices w/VSESA mount (75x75mm) spec.

 WALL MOUNT KIT (E143088)

- The WALL MOUNT KIT is design for system can be mounted at wall through two

mental frames.

 Barcode Scanner Reader KIT (E093433)

- The Barcode Scanner Reader KIT is design with USB interface for all X-Series

configurations.

Biometric Fingerprint Reader KIT (E001001)

You can add a fingerprint reader to the X-Series touchcomputer to any of the three mounting

locations located on the display head top, left, and right. Software application and drivers can

be found in the following directory or on www.elotouch.com

C:\EloTouchSolutions\Peripherals

The fingerprint reader is powered by the USB bus. The reader optically scans the fingerprint

when the user touches the glowing window. Optical technology gives the highest quality

fingerprint scans and reliability.

Fingerprint reader specifications are shown in the table below.

Feature

Spec Description

Power supply

5.0VDC +/- 5%

Power consumption

< 1.0 W

Current draw – scanning mode

< 100 mA

Current draw – idle mode

< 120 mA

Current draw – suspend mode

< 0.5 mA

Image resolution

Up to 512 dpi or higher resolution.

Image color

8-bit grayscale (256 levels of gray)

Scan capture size

14.6mm (nominal width) x 18.1mm (nominal

length)

Image capture speed

100 ms or higher.

Interface type

USB 2.0 (Compatible with 1.0 / 1.1)

Operating temperature

0 to 40°C

Storage temperature

-10 to 60°C

ESD Susceptibility

>15KV.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 50 51

Comments to this Manuals

No comments

Elo Touch Solution X7-17 User Manual Page 29

Comments to this Manuals

Related products and manuals for POS terminals Elo Touch Solution X7-17